Recording Overview
When you record to odd or even track numbers you must pan your
input to the left (ODD ) or to the right (EVEN ) to get the signal there.
A lot of people seem to record Track 1 with no problems but can't get
Track 2 to receive input. Pan right on the input channel and arm Track 2.
Light up the INPUT MONITOR button near the transport controls.
Turn L/R off on the input channel and light up the 1/2 button and select the
input channel which now stays lit instead of blinking. The input should now
only be audible thru Track 2. Therefore, if you press record you will now
capture your input channel to the track that you selected.
Repeat for all 24 tracks!
---------
click "imp 1-12"
click "L/R"
click select button over track 2
click "1/2" button
make sure Q-channel mode is not active and pan function is enabled
"pan" track 2 all the way right - but you're actually sending it to group 2
click "1/2" button to leave that mode
click "channel 2 record" button
click "tracks 1-12 fader bank button",
adjust master fader and track 2 fader to suit playback volume
then hit record+play
